EPEVER Photo voltaic CHARGE CONTROLLER SETUP: TRACER AN SERIES CONTROLLE

EPEVER Photo voltaic CHARGE CONTROLLER SETUP: TRACER AN SERIES CONTROLLE

Blog Article

The EPEVER Tracer AN Series Solar Cost Controller is usually a highly successful photo voltaic controller suitable for off-grid photo voltaic systems. Determined by multiphase synchronous rectification technological know-how, it ensures optimized Power conversion and program balance for a wide array of photovoltaic (PV) apps.

Essential Capabilities of your EPEVER Tracer AN Series Controller
The Tracer AN collection makes use of EPEVER Photo voltaic Cost Controller know-how for superior solar energy harvesting. Key characteristics include:

Multiphase Synchronous Rectification (MSR) for improved Strength conversion.
Superior MPPT Algorithm with >99% efficiency.
Dual-Stage Charging for enhanced battery life.
Liquid crystal display Display screen with serious-time details checking.
Various Load Control Modes including manual and timer.
In depth Digital Protections from overcharging, about-discharging, limited circuits, and reverse polarity.
Phase-by-Phase Guidebook to Establishing the EPEVER Tracer AN Series Controller
one. Unboxing and Making ready the Controller
Assure all parts are incorporated: Tracer AN unit, temperature sensor, communication cables, and consumer handbook.
Confirm the design quantity and voltage scores match your solar panel and battery technical specs.
two. Mounting the Cost Controller
Pick a nicely-ventilated, dry location near the battery financial institution.
Safe the Tracer AN controller using the delivered mounting brackets.
Retain suitable clearance for heat dissipation.
3. Wiring the Photo voltaic Cost Controller
Caution: Normally observe suitable security protocols and ensure the process is driven off prior to connecting components.

Move one: Hook up the battery terminals towards the charge controller (beneficial to constructive, unfavorable to negative).
Action 2: Connect the photo voltaic panel array for the PV input terminals.
Action 3: Join the load terminals if utilizing a direct load relationship.
Phase 4: Double-Look at all connections for polarity and tightness.
4. Configuring the Controller Settings
Electric power about the controller by connecting the battery initial.
Utilize the LCD Display screen to navigate the configurations menu.
Configure:
Battery Sort: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Control Modes: Guide, timer, mild Command.
5. Checking and Knowledge Logging
The Tracer AN Series supports authentic-time monitoring utilizing the MT50 remote meter.
Data might be logged by way of the RS485 interaction port making use of software for instance Solar Station Computer system.
Remote checking is feasible with the EPEVER WiFi module.
six. Troubleshooting Common Difficulties
Problem 1: No Ability Output

Examine battery voltage and connections.
Verify PV panel voltage exceeds battery voltage.
Situation 2: In excess of-Voltage Protection

Confirm the photo voltaic array’s voltage rating.
Regulate program parameters if vital.
Concern three: No Battery Charging

Inspect PV wiring for continuity.
Verify MPPT options in the menu.
Advantages of the Tracer AN Collection with MSR Technological innovation
The multiphase synchronous rectification technology assures:

Bigger Effectiveness: Minimized Power losses through conversion.
Enhanced Reliability: Steady effectiveness beneath variable hundreds.
For a longer time Battery Everyday living: Steady and precise charging profiles.
Conclusion
The EPEVER Solar Cost Controller with multiphase synchronous rectification More info technology is surely an Fantastic choice for optimizing solar power technology and extending battery existence. By pursuing the above setup information, buyers can make sure greatest performance and method longevity.