EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN Sequence CONTROLLE
EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN Sequence CONTROLLE
Blog Article
The EPEVER Tracer AN Series Solar Cost Controller is usually a very successful photo voltaic controller suitable for off-grid photo voltaic methods. Determined by multiphase synchronous rectification technology, it makes sure optimized energy conversion and method balance for an array of photovoltaic (PV) apps.
Vital Features of the EPEVER Tracer AN Series Controller
The Tracer AN series utilizes EPEVER Solar Demand Controller technology for exceptional solar Power harvesting. Important functions contain:
Multiphase Synchronous Rectification (MSR) for improved Vitality conversion.
Superior MPPT Algorithm with >99% efficiency.
Dual-Stage Charging for enhanced battery life.
Liquid crystal display Display with genuine-time info monitoring.
Several Load Management Modes which includes handbook and timer.
In depth Digital Protections from overcharging, about-discharging, limited circuits, and reverse polarity.
Action-by-Phase Guidebook to Creating the EPEVER Tracer AN Series Controller
1. Unboxing and Making ready the Controller
Be certain all factors are involved: Tracer AN device, temperature sensor, conversation cables, and user handbook.
Validate the design amount and voltage ratings match your photo voltaic panel and battery technical specs.
two. Mounting the Charge Controller
Pick a nicely-ventilated, dry locale near the battery bank.
Protected the Tracer AN controller utilizing the delivered mounting brackets.
Retain suitable clearance for warmth dissipation.
3. Wiring the Solar Charge Controller
Warning: Always follow right basic safety protocols and ensure the system is run off in advance of connecting parts.
Stage 1: Join the battery terminals to the demand controller (optimistic to good, negative to detrimental).
Phase 2: Hook up the solar panel array towards the PV input terminals.
Action 3: Connect the load terminals if employing a direct load connection.
Move 4: Double-check all connections for polarity and tightness.
four. Configuring the Controller Settings
Power about the controller by connecting the battery 1st.
Use the Liquid crystal display Show to navigate the options menu.
Configure:
Battery Sort: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Control Modes: Guide, timer, light Regulate.
five. Monitoring and Click Here Facts Logging
The Tracer AN Series supports true-time checking utilizing the MT50 remote meter.
Facts might be logged by way of the RS485 interaction port utilizing application like Solar Station Laptop.
Remote checking is feasible With all the EPEVER WiFi module.
six. Troubleshooting Frequent Difficulties
Situation 1: No Electricity Output
Verify battery voltage and connections.
Validate PV panel voltage exceeds battery voltage.
Problem two: More than-Voltage Security
Verify the photo voltaic array’s voltage ranking.
Regulate process parameters if important.
Problem three: No Battery Charging
Inspect PV wiring for continuity.
Confirm MPPT options in the menu.
Advantages of the Tracer AN Collection with MSR Technology
The multiphase synchronous rectification technological innovation guarantees:
Bigger Efficiency: Minimized Power losses during conversion.
Improved Trustworthiness: Stable effectiveness under variable masses.
For a longer period Battery Existence: Reliable and accurate charging profiles.
Conclusion
The EPEVER Photo voltaic Charge Controller with multiphase synchronous rectification technological innovation is definitely an exceptional choice for optimizing solar energy generation and lengthening battery everyday living. By adhering to the above mentioned set up guidebook, people can ensure highest effectiveness and procedure longevity.